THIS ARTICLE AT A GLANCE

CONTACT ETS

If you have any questions or would like to discuss further what you should be doing, ETS is here and willing to help.
Call 0117 205 0542
Email enquiries@energy-ts.com
Submit a contact form

CHECK OUR SERVICES

Sims Metal Management – Design & Specification

Energy & Technical Services was appointed to provide technical expertise on the design and manufacture of a new Dry Cooler, as the existing motor on the shredding plant needed to be replaced with a more operationally efficient model.

After successfully delivering the designs and specifications, we continued to work with client representatives to procure works for the commissioning of the new 4,476kWh water cooled motor before novating to Transtherm.

Our consultant identified a number of challenging environmental and working conditions during the initial site survey. Working closely with contractors and client representatives, our team ensured the new equipment would be easy to maintain and could operate under varying torque loads and temperatures.

Challenge

The design of the Dry Cooler and Controls needed to maintain motor temperatures between 250C to 300C in ambient conditions and operate under varying torque loads. Our consultants undertook complex rejected heat load calculations to ensure the recommended options would meet this requirement.

Added Value / Achievements

Our consultants’ valuable product knowledge and experience ensured our client was presented with the best options available and provided with appropriate guidance on maintenance / serviceability.

Technical expertise support and action

Controls remain to operate in the required condition

related CASE STUDIES

Aldi UK & Ireland – ISO50001

A retail company achieved ISO 50001 certification, passing both first and second stage audits without any non-conformities. ETS proved instrumental in implementing ISO 50001 and maintaining compliance with the standard.

Midcounties Co-Operative – Solar Panel Installation Assessment

This project aimed to understand how solar PV installation will benefit the client long term. We have identified the yield and efficiency of solar PV and what the cost of repurposing a number of solar PV panels that were in storage specifically for Co-op. This developed into a compatibility study for solar panel installation across 44 sites.

Date Palm Developments – Complete Building Solutions

Date Palm Developments (DPD) approached ETS to design, install, and commission a new Building Management System (BMS) for their proposed "Ottons Lab." Given the complex nature of the facility, which specialises in plant cloning, highly detailed designs relating to HVAC controls and operational security were necessary to maintain optimal conditions for both plant growth and occupant comfort in the office areas.